About the author

How to Unlock Your Samsung Galaxy S2 With an Unlock Code

Our Blog,Samsung Instructions,Unlocking Instructions 0 comments

Unlock Samsung Galaxy S2

Listed below are the specifications and unlocking instructions for the Samsung Galaxy S2:

Phone Specifications:
OS: Android OS, v2.3.4 (Gingerbread)
CPU: Dual-core 1.2 GHz Cortex-A9
Memory: 16/32 GB (add up to 32 GB more with microsd), 1 GB RAM
2G Network: GSM 850 / 900 / 1800 / 1900
3G Network: HSDPA 850 / 900 / 1900 / 2100

Unlocking Instructions:

1. Input a non accepted simcard and power on the phone

2. The bottom of the phone will display the message “phone locked”. Tap the message with your finger and slide it upwards or off to the side.

3. On the next screen you will be prompted to enter the “Network lock control key”. You can now enter in your unlock code. If you don’t have an unlock code for your phone, you can get one on our unlock Samsung page.

4. You should see a “Network Unlock Successful” message. Your phone is now unlocked.

What to do if your Nokia is Showing “Not allowed” or “Cannot Undo Restriction”

Nokia Instructions,Our Blog,Unlocking Instructions 0 comments

Here’s what you need to do if your Nokia is showing “Not allowed” or “Cannot Undo Restriction”.

You will need the following:

•A USB Cable for your Nokia phone.

•The correct USB Cable Drivers. Installing the ‘Nokia PC Suite’ software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers. You can find it here

•A small software application that you can download from here.

Once you have all of these, follow the directions below:

Video tutorial:

1.Switch on your phone without a sim card. You should be prompted to ‘Start Phone Without SIM Card’ or similar. Click ‘Accept’ or ‘OK’. Your phone is now in offline mode.

2.Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode’, mass storage mode etc… You can select “Nokia mode” or “PC Suite mode”.

3.Start the SendCodeUsb application you downloaded earlier and click on the ‘Read Phone Info’ button. The application should display several lines of information. If it says “not found” replug your phone into the usb, and then click read phone info

4.If the application still displays ‘Not Found’, your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone.

5.Now make sure you check the ‘Check For Fbus’ checkbox. Also make sure the ‘Level(1-7)’ selection is set to the appropriate carrier

  • For ROGERS AND FIDO use +7 or +1
  • For all Telus devices use +5 or +1
  • For all UK devices use +1
  • For all Tmobile USA devices use +1

6. Enter Only The Numbers of the correct unlock code into the ‘Unlock Code (15 digits)’ field  (e.g. if your correct unlock code was #pw+123456789012345+1# you would enter only 123456789012345 in this field).

7. Click on the ‘Send Unlock Code’ button. The application should confirm that your Nokia phone is now unlocked.


How To Find Your Unlocking Instructions

Our Blog,Unlocking Instructions 0 comments

At this point, we are assuming that you have purchased an unlock code already (if you haven’t, click here) and now need to enter it into your phone. So to find your unlocking instructions, take a look at the left menu that says “Unlocking Instructions”, scroll through the list to find your manufacturer, and click on it. Once there you will see a list of all the unlocking instructions for that manufacturer.

How To Unlock Your Acer Cell Phone

Acer Instructions,Our Blog,Unlocking Instructions 0 comments

How to enter codes for Acer models

1. Turn on phone with a non-accepted SIM card

2. Phone will prompt you for unlock code

2. Enter code and your phone is unlocked!

How To Unlock Your Dell Cell Phone

Dell Instructions,Our Blog,Unlocking Instructions 0 comments

Dell unlocking instructions:

1. Insert a SIM card from a different carrier (not a sim from the original carrier)

2. Upon entering this new sim, the phone won’t recognize it and will prompt you for the unlock code

3. Type in the unlock code. Your cell phone is now unlocked

How Can I Find Out Which Locks Are Enabled On My Sony Ericsson Cell Phone?

Ericsson Instructions,Our Blog,Unlocking Instructions 0 comments

If you have a newer Ericsson cellphone (like the X10, or other models running off the Android OS), you can do the following to see which locks are  enabled:

from keypad dial  *#*#7378423#*#*

A menu should appear with a list of all the locks (as seen below). If there is an X in the box, that would indicate that the lock is enabled. The number to the right lets you know how many code attempts you have left before hard-locking the phone.

[x] network    10
[] network subset   0
[]service provider  0
[]corporate   0
[] sim   0


To find out which locks are enabled on older Sony Ericsson cellphones, you can do the following:

just press:
>*<<*<*  (right arrow, star, left arrow, left arrow, star, left arrow, star)

– Select “Service Info”
– Select “Sim Lock”
– You should see “network”, “network subset”, “service provider”, “corporate”, “extended”.  And next to each you should see a small lock. If the lock is in the locked position, that service is locked. If the lock is unlocked, then that particular service us unlocked (therefore you won’t need a code for it)

How to Unlock Your Huawei Comet U8150 With an Unlock Code

Huawei Instructions,Our Blog,Unlocking Instructions 0 comments

Huawei Comet U8150 Unlocking Instructions:

1. Insert a non accepted SIM card
2. Phone will ask for an unlock code
3. Enter code that was provided by us

How to Unlock Your Huawei Modem With an Unlock Code

Huawei Instructions,Our Blog,Unlocking Instructions 0 comments

Huawei unlock code instructions:

1. Open Hyperterminal : C:\Program Files\Windows NT (should be there)
2. You must set com port on modem (Huawei Mobile Connect – 3G Modem)
3. Type following command : AT^CARDLOCK=”<you unlock code>”
4. Validate by pressing Enter.

How to Unlock Any Patech Cellphone With an Unlock Code

Our Blog,Pantech Instructions,Unlocking Instructions 0 comments

How To Enter Unlock Codes on ALL Pantech Cell phones:

1 – Insert non-accepted SIM card

2 – Power on the device

3 – The display will show “Change SIM” and Left Soft Key will be labeled “Unlock”

4 – Press Left Soft Key – A “Password” box will appear on display

5 – Enter Unlock Code

6 – Press “OK” – Center Soft Key. The device will display “rebooting” and then power cycle

7 – The device is now unlocked


Power on with incorrect sim, enter unlock code when prompted. Enter code using onscreen keyboard when unlocking a Pocket PC Phone

How to Unlock Your Sony Ericsson X10 With an Unlock Code

Ericsson Instructions,Our Blog,Unlocking Instructions 0 comments

Sony Ericsson Xperia X10 unlock code instructions:

1. Put in a sim card from a non accepted network

2. Turn on the phone

3. It will then request for an unlock code

4. Press the unlock code box with your finger and then the number pad will appear at the bottom of screen

5. Input the unlock code

6. Press “UNLOCK” button which is below the unlock code box on screen

Page 30 of 33« First...1020...2829303132...Last »